Sign In | Join Free | My myecer.com
myecer.com
Products
Search by Category
Home > Instrument Parts & Accessories >

IEC 61558 Figure 6 Mandrel test For Checking Mechanical Withstanding Of Insulating Materials In Thin Sheet Layers

Categories IEC62368 Test Equipment
Brand Name: KingPo
Certification: calibration cert
Place of Origin: China
MOQ: 1
Payment Terms: T/T
Packaging Details: safety carton pack or plywood box
Standard: IEC 61558 Figure 6
Weight: 100N*1,50N*1( the pulling force of 50N, 100N, 150N can be achieved
Rotate angle: 230°
Test mandrel: Triangle bar with a tip including metal foil
test voltage: at least 5 kV
thin sheet: 70 mm in width
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    IEC 61558 Figure 6 Mandrel test For Checking Mechanical Withstanding Of Insulating Materials In Thin Sheet Layers

    Test arrangement for checking mechanical withstanding of insulating materials in thin sheet layers


    1.Application:

    This device is used to test the Insulation anti damage strength verification for non separable thin layer materials.Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements and IEC61558-1-Fig6


    Test procedure

    • Installation

    * This tester should be placed on a level table

    • Preparing works

    1. For the mandrel test, three separate test specimens of thin sheets 70 mm in width shall be supplied

    2. Rotate the device to original position

    (Initial)

    2.1) According to the standard, install the sample and foil,then hang the corresponding weight (50N /100N/ 150N).

    2.2) The mandrel shall be slowly rotated forwards and backwards three times for 230° without jerking motion. If the specimen breaks at the clamping device during the rotation, the test shall be repeated. If one or more specimens break at any other place, the test is not fulfilled.

    (final)

    2.2)While the mandrel is in its final position,plug the metal bar into hold of the mandrel,within a minute following the final positioning, a dielectric strength test voltage shall be applied for 1 minute as described in IEC61558-clause 18.3 between the mandrel and the metal foil as follows:

    – a test voltage of at least 5 kV or the applicable test voltage of Clause 18.3 multiplied by 1,35 for a specimen consisting of several non separable layers ( at least 3 layers) whichever is the greater;

    – a test voltage of at least 5 kV or the applicable test voltage of 18.3 multiplied by 1,25 for a specimen consisting of 2/3 of the number of at least 3 separated layers whichever is the greater;

    – a test voltage of at least 5 kV or the applicable test voltage of 18.3 multiplied by 1,25 for a specimen consisting of one layer of the number of 2 separated layers whichever is the greater.

    No flashover or breakdown shall occur during the test, and corona effects and similar phenomena shall be disregarded


    Product Tags:

    av test equipment

      

    tv test equipment

      
    Quality IEC 61558 Figure 6 Mandrel test For Checking Mechanical Withstanding Of Insulating Materials In Thin Sheet Layers for sale
    Send your message to this supplier
     
    *From:
    *To: KingPo Technology Development Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Find Similar Products By Category:
    Inquiry Cart 0