Categories | LED Lighting Accessories |
---|---|
Brand Name: | SUNGLU |
Model Number: | SL-86PIR-001 |
Certification: | CE RoHS |
Place of Origin: | China |
MOQ: | 100 |
Price: | Negotiate |
Payment Terms: | Western Union, T/T, L/C |
Supply Ability: | 100000 |
Packaging Details: | OPP bags or customized box |
Item Name: | 86 PIR Motion Sensor |
Input Voltage: | 180-250V |
Size: | 86*66*30 |
Load Power: | =<100W |
Detecting distance: | 4-8Metor |
Inducttion Angle: | 140° |
Application: | All kinds lights , appliances |
PIR Sensor Type 86*86 Pannel installing pir motion sensor IR Sensor
Features:
Dual induction :PIR senor + light sensor
Activated by the detection of moving body heat, the load will stay
on for a preset period of time usually 15 seconds.it can be
customized according to customer's requirements.. If body heat is
no longer detected, the time period will elapse and the load will
be switched off ,compared with traditinal pushbutton light it's
more convenient.
It have light sensor adjustable function. you can choose it only
work in a dark condition which means even people pass by, the load
will not switch on which is engey-saving
Parameters:
Working Voltage: | AC180-250V |
Output Mode | Induction Output |
Product size: | 86*86mm |
Time delay Setting: | 10S 40S/4min (custumized) |
Photosensing setting:: | Deep Dark/light Dark/All day |
Detection Distance | 4-8 meters |
Maxium Power: | <=100W |
Application | All kinds lights and appliances |
Remarks | for RGB Strip bulbs etc |
Notice
1. motion sensor Controls :light sensors for outdoor lights
Installation strictly follow product wiring diagram, do not short
circuit.
2. Recommend one switch control one load, when the load is too
large or to small, please consult to manufacturers.
3.Keep distance between switch and load more than 0.3 meter, do not
exposed to direct sun light or lighting ,don’t put it in rapid
environmental changes(eg: big wind).
4. Don’t conduct the hot line job, please electrify only after
sensor switch has been installed
5. The switches have starting time after connecting the
electricity. About 1-2 minutes later it will work normally. If
normally using, switches will always connect the electricity, so no
need worry about this.
6. The infrared switches are based on detect the difference between
the human body temperature and the environment temperature .The
sensitivity will be affected by many factors such as the
environment temperature, the walk speed and direction.( the
induction distance is about 3~5 meters as the environment temperate
higher in summer, and about 5~7M in winter as the environment
temperate lower in winter, that is normal).
7. ir sensors use the unit doublet probes, so the sensitivity in
right-left direction is a little difference from up-down direction,
that is normal.