Fully Automatic Waste Plastic To Oil Plant / Plastic To Fuel
Our waste plastic to fuel conversion plant adopts the latest pyrolysis technology, and have obtained several
patents and certificates after decades of innovation and
development. It has been widely recognized at home and abroad, with
superior performance, competitive price, high efficiency,
maintenance convenience and cost saving.
Our skilled professionals will supply customers with optimal
all-in-one solutions required on civil drawings, installation &
commissioning and personnel training as well as after-sale service.
Main raw material: PP, PE and PS.
Power required: around 280KWH / Ton
Daily capacity to process waste plastic: between 10 tons to 500
Oil ratio: between 50% to 90% according to the different raw
Function and features of waste plastic to fuel conversion plant
The function of the equipment is utilizing the waste plastics to be
catalytic cracked in Atmospheric pressure reactor, and then the
organic polymer chain in waste plastics is cut off and reduced to
low molecular weight hydrocarbons, fuel oil. The combustible
unsolidified gases under C5 gas generated by the equipment is
recycled by the gas recovery unit and the transported fuel burner
by pipeline after steady pressure. So it is heated by itself and
eliminates the secondary environmental pollution.
Heated by the combustible gas produced in the pyrolysis (every ton
of raw material can produce about 60kg gas). Saving more than 500
degrees of electricity per ton of raw materials. Compared to the
direct gas emission, it not only eliminates the pollution, but also
increases the economic benefits. (The economic benefits per ton of
raw materials are greater than 400RMB)
Normal pressure operation, computer monitoring, multiple
protection, good security.
Thorough catalytic cracking. The organic components of waste
plastics can be completely cracked and the oil yield is high (the
amount of waste plastics treated by single kettle per day more than
2 tons or the daily oil production more than 1 ton).
The raw materials do not need washing, avoid water pollution. The
gas generated by itself can be used to heat, which is energy saving
and environmental protection. And the residue is of pulverized
coal, which can be directly sold as raw material for carbon black
industry or directly involved in coal combustion.
Full computer control, easy operation and less workers. A single
shift of 30 tons of equipment per day requires only 4 to 6 people
Adopting constant pressure high temperature slag discharging device
(patent of our company), solve the safety hidden trouble caused by
the leakage of slag discharge device
- Application of gap agitator
The gap agitator (patented by our company) and special heat
conduction medium are used to solve the problem of gelatinization
and the shortcoming of slow heating rate in the process of plastic
- Stable flow, teat and temperature
The gas recovery and steady pressure supply device (patented by our
company) solves the problem that heat is unstable and temperature
cannot be controlled because of the unstable flow rate of gas
during the pyrolysis process.
- High quality fuel and low energy consumption
Special plastic cracking catalyst (proprietary technology of our
company) formula and plastic cracking process (patented by our
company). By combining liquid phase catalytic cracking with gas
phase catalytic cracking, the shortcomings of liquid phase
catalytic cracking and poor quality of oil products are avoided,
and the disadvantages of high temperature and large energy
consumption of gas phase catalytic cracking are avoided.
The technology of online catalytic cracking of wax oil is used to
solve many problems of wax oil.
The 4 final products we get after pyrolysis and distillation. And
the usages of them is below.
1- The refining oil
(1) diesel oil (0# or 5#)
It contains 75 - 80% for all oil. And it can be used in forklift
and other engineering truck, vessel, generator and etc.
(2) gasoline oil
It contains around 20% for all oil. And it can be as car oil after
blending with oil of higher octain value in 1:1, or it used in gasoline generator directly.
It will be reused. (The combustible gas generated in processing can
be recycled as fuel to heat equipment itself, which will save a lot
of energy for the whole plastic pyrolysis process.)
It will be reused as condensation water.
It can be made active carbon and carbon rod or combustion alongwith
coal and carbon.
1. Design the installation drawings according to your site.
2. Provide quality guarantee within 2 years for the main equipment
(except for violation of operating procedures and artificial
3. Provides lifetime maintenance for machine.
4. Provides upgrade technology paid services ( under customers’
5. For each set of machine, one technician will be sent to guide
your installation, test the machine and train your workers.
1. Customers are required to do market research for the local waste
plastic carefully before ordering our company's equipment. There is
only reliable supply of raw materials, then the return of your
investment will be ensured.
2. The equipment production and storage areas for focus' fire area,
it is strictly prohibited to fireworks. Please stay away from
residents living quarters.