Continuous Pyrolysis Waste Plastic To Oil Plant 10 Tons To 500 Tons
Main raw material: PP, PE and PS.
Power required: around 280KWH / Ton
Daily capacity to process waste plastic: between 10 tons to 500
Oil ratio: between 50% to 90% according to the different raw
How to safely and completely eliminate the pollution of plastics to
the environment, turn waste into treasure, and truly use it
effectively. Moreover, it will not produce secondary pollution, and
can obtain more lucrative economic returns from the control of
environmental pollution. The true social and economic benefits are
the goals that Anhui Aosheng Resources Utilization Company has been
pursuing. Through more than ten years of efforts and numerous
trials by our researchers, we have finally solved various problems
in the process of producing waste fuel from waste plastics.
At the same time, we have summarized the investment of similar
equipment abroad, large floor space, complicated structure,
cumbersome operation, high production cost, strict raw material
requirements, high energy consumption, low thermal efficiency,
thick carbon deposit in the kettle, and heavy oil. Based on the
lack of economic benefits and other defects, after repeated
research and review of large number of domestic and foreign related
materials, combined with the structural characteristics of China's
manufacturing of chemical machinery and equipment, on the basis of
numerous experiments, successfully developed a low cost for
popularization in various countries. The utility model has the
advantages of simple structure, small occupied area, low energy
consumption, low production cost, small investment, wide source of
raw materials, fast return on investment, and high-quality fuel
oil, and “environmental energy-saving waste plastics atmospheric
cracking equipment”. The equipment fully utilizes the flammable gas
generated by itself to heat, avoiding a large amount of electricity
consumption expenses of the electric heating equipment, and fully
utilizing the comprehensive utilization of resources.
Function and characteristics of environmentally friendly and
energy-saving waste plastics for atmospheric pressure cracking
production of fuel equipment:
The function of the equipment is to use the waste plastics
discarded in the waste to be catalytically cracked in the
atmospheric pressure reactor to cut off the organic polymer chains
in the waste plastics and reduce them into low-molecular
The flammable non-coagulating gas below C5 generated in the
production process of the equipment is recovered by the gas
recovery device, and is regulated by the pipeline to be burned to
the fuel burner to heat the equipment itself, thereby eliminating
the secondary pollution of the gas to the environment.
- It is heated by the flammable gas generated during the cracking
process (about 60 kg of gas per ton of raw material). Each ton of
raw material saves more than 500 degrees of electrical energy,
which eliminates the pollution caused by direct gas emission and
increases the economic benefit (the economic benefit per ton of raw
materials is more than 400 yuan).
- Atmospheric operation, computer monitoring, multiple protection,
and good security.
- Catalytic cracking is thorough. It can completely crack the organic
components in the waste plastics and has a high oil yield (the
amount of waste plastics processed per day is more than 2 tons or
the daily oil is more than 1 ton).
- Good environmental performance. The raw materials do not need to be
cleaned to avoid water pollution. The gas produced is used for
heating the equipment itself, which is energy-saving and
environmentally friendly. The residue is coal powder, which can be
sold as a raw material of the carbon black industry or directly
involved in coal combustion.
- high degree of automation. The equipment is fully computer
controlled, simple to operate, and requires fewer staff. A single
shift of 30 tons of equipment per day requires only 4 to 6 people.
- The constant pressure type high temperature slag discharger (our
company's patent) is used to solve the safety hazard caused by the
leakage of the slag discharger.
- The gap stirrer (our company's patent) and special heat-conducting
medium solve the problem of gelation in the heating process of
plastics and the slow heating rate.
- The gas recovery regulator supply device (our company's patent)
solves the problem that the heat flow caused by the instability of
the cracking process is unstable and the temperature cannot be
- Special plastic cracking catalyst (our company's proprietary
technology) formulation and plastic cracking process (our company's
patent) are used. The combination of liquid phase catalytic
cracking and gas phase catalytic cracking avoids the disadvantages
of liquid phase catalytic cracking and poor oil quality, and avoids
the disadvantages of high temperature and high energy consumption
for gas phase catalytic cracking.
- The use of wax oil online multiple catalytic cracking technology to
solve the problem of oil wax oil.
The technology and process flow of environmentally-friendly and
energy-saving waste plastics for atmospheric pressure cracking
production of fuel oil equipment has been independently researched
and developed by our company. It has won 4 national invention
patents and 29 utility models, and many new technologies are under
The environmentally-friendly and energy-saving waste plastics are
produced at the domestic and international leading level by the
atmospheric pressure cracking production fuel technology,
especially at the domestic and international leading level in terms
of energy conservation. The existing equipment for processing 10
tons of waste plastic and any processing capacity is available for
customers to choose.
- The equipment provided by our company is a turnkey project, and the
quality guarantee period of the main body is two years (except for
violation of operating procedures and man-made damage)
- The equipment provided by our company is repaired for life.
- The equipment provided by our company enjoys the technology paid
upgrade service for the whole life (customer voluntarily)
- Before ordering our company's equipment, please carefully do a good
job in the local waste plastics market investigation. Only reliable
supply of raw materials can guarantee your return on investment.
- The production and storage areas of the equipment are key
fire-prevention areas, and fireworks are strictly prohibited;
please stay away from residential areas.