Company Info. |
Shenzhen Lys Technology Co.,ltd |
View Contact Details |
Product List |
We can produce tile cutter wheel for you with different size and specification
Tungsten Carbide Tile Cutter Blades
type | out dia(mm) | tol(mm) | inner hole dia(mm) | tol(mm) | thickness(mm) | tol(mm) | cut angle |
φ22xφ6x4.7 | 22 | ±0.2 | 6 | +0.1/-0 | 4.7 | +0/-0.1 | 90°100°110°120° |
φ22xφ6x2.0 | 22 | ±0.2 | 6 | +0.1/-0 | 2 | +0/-0.1 | 90°100°110°120° |
φ22xφ10.5x3 | 22 | ±0.2 | 10.5 | +0.1/-0 | 3 | +0/-0.1 | 90°100°110°120° |
φ22xφ10.5x2 | 22 | ±0.2 | 10.5 | +0.1/-0 | 2 | +0/-0.1 | 90°100°110°120° |
φ20xφ5x3.0 | 20 | ±0.2 | 5 | +0.1/-0 | 3 | +0/-0.1 | 90°100°110°120° |
φ20xφ5x2.0 | 20 | ±0.2 | 5 | +0.1/-0 | 2 | +0/-0.1 | 90°100°110°120° |
φ18xφ6x3.0 | 18 | ±0.2 | 6 | +0.1/-0 | 3 | +0/-0.1 | 90°100°110°120° |
φ18xφ6x1.5 | 18 | ±0.2 | 6 | +0.1/-0 | 1.5 | +0/-0.1 | 90°100°110°120° |
φ16xφ6x3.0 | 16 | ±0.2 | 6 | +0.1/-0 | 3 | +0/-0.1 | 90°100°110°120° |
φ16xφ6x1.5 | 16 | ±0.2 | 6 | +0.1/-0 | 1.5 | +0/-0.1 | 90°100°110°120° |
φ15xφ6x2.0 | 15 | ±0.2 | 6 | +0.1/-0 | 2 | +0/-0.1 | 90°100°110°120° |
φ15xφ6x1.5 | 15 | ±0.2 | 6 | +0.1/-0 | 1.5 | +0/-0.1 | 90°100°110°120° |
φ12xφ3x3.0 | 12 | ±0.2 | 3 | +0.1/-0 | 3.0 | +0/-0.1 | 90°100°110°120° |
φ12xφ4x2.0 | 12 | ±0.2 | 4 | +0.1/-0 | 2.0 | +0/-0.1 | 90°100°110°120° |
[How tungsten carbide tile cutting blades produced]
Carbide production / Blanks
Carbide is a composite material consisting of particles mainly with
tungsten carbide as hard material and
a metallic binder.For this reason, with carbide it is possible to achieve hardness and toughness combinations
which can’t obtained with other materials .
Powder Production
Due to its high melting point tungsten carbide (WC)can only be
produced through sintering when needed
for technically sophisticated applications . For this purpose , the powder consisting of the tungsten carbide,
the cobalt binder and sometimes additional alloys is mixed , milled
and spray-dried .
This process results in a spray-dried granulate which can easily be
used for production,since its chemical
and physical properties have already been adapted to the final
carbide specification .
Ready to press powder
Manufacture of carbide blanks
By applying pressure the carbide powder is converted into a blank
.The material will receive its near
net shape througt the application of traditional machining methods( sawing ,drilling,milling , turning ),
so that extended machining of the sintered carbide blank is no
longer necessary.The density of the blank is approx.50% of the sintered carbide ‘s
density which leads to an
approx.20% shrinkage in length.
Sintering
The sintering process converts the blank into a homogeneous piece of carbide with a high degree
of hardness .When sintering hard metal (usually at a temperature of approx.1400 c ), this processis called liquid phase sintering. In this case ,the binder (e.g. cobalt ) melts and wets the WC hard
material particles .After sintering, the density of the carbide is almost , or even precisely, the same
as the theoretical density. Any residual porosity which occurs after the sintering procedure may
be removed through an ensuring HIP process .
Shenzhen Lys Technology Co., Ltd
Company address: 20th floor, Saigeyuan building C, Huaqiang south
road, Futian district, Shenzhen China
Factory address: No. 57 Jinshan industrial park, Hetang district,
Zhuzhou City, Hunan province China
Tel: 0086-731-22397993 Fax: 0086-731-22623865
E-mail: peter@lystechnology.com linda@lystechnology.com
Website: www.lystechnology.com www.lyscarbide.com http://lystechnology.en.gasgoo.com