Categories | PDC Tool |
---|---|
Brand Name: | baililai |
Model Number: | PDC stone composite sheet |
Certification: | 9001 |
Place of Origin: | china |
MOQ: | 10 |
Payment Terms: | T/T |
Packaging Details: | Plastic box packaging |
Process: | High temperature and high pressure sintering |
Features: | High hardness, wear resistance, economic benefits |
Use: | For the cutting and grinding of strong abrasive stone and concrete floor grinding |
Raw materials: | Diamond powder |
Substrate: | Tungsten carbide |
Wear and tear ratio (X10000): | 25 |
Introduction:
PDC stone composite sheet is a diamond powder and carbide substrate sintered at high temperature and pressure conditions, this product has high hardness, wear resistance and other characteristics, mainly used for cutting and grinding of strong abrasive stone and mixed earth floor grinding.
Product introduction:
Our company produces PDC stone composite sheet using Diamond powder as raw material, the diamond powder and carbide substrate sintered at high temperature and pressure conditions, the product has high hardness, wear resistance, economic and other characteristics, mainly used for cutting and grinding of strong abrasive stone and mixed earth floor grinding.
Product range | Product feature | Scope of application | ||
Diamond thickness(mm) | Wear ratio(X10000) | Impact toughness(J) | ||
PDC-SA | 1.0-1.2 | 25 | 300 | For strong abrasive stone cutting and grinding of mixed earth floor. |
Specification table :
specification | 2513 | 2508 | 1919 | 1916 | 1913 | 1908 | 1619 | 1616 | 1613 | 1610 | 1608 |
D(mm) | 25.40 | 25.40 | 19.05 | 19.05 | 19.05 | 19.05 | 15.88 | 15.88 | 15.88 | 15.88 | 16.00 |
H(mm) | 13.20 | 8.00 | 19.00 | 16.31 | 13.20 | 8.00 | 19.00 | 16.00 | 13.20 | 10.00 | 8.00 |
t(mm) | It is specified in the model | ||||||||||
specification | 1316 | 1313 | 1308 | 1304 | 1303 | 1011 | 1008 | 1004 | 0808 | 0803 | 0608 |
D(mm) | 13.44 | 13.44 | 13.44 | 13.30 | 13.30 | 10.00 | 10.00 | 10.00 | 8.20 | 8.20 | 6.00 |
H(mm) | 16.00 | 13.20 | 8.00 | 4.50 | 3.53 | 11.00 | 8.00 | 4.50 | 8.00 | 3.53 | 8.00 |
t(mm) | It is specified in the model | ||||||||||