Categories | Professional Microdermabrasion Machine |
---|---|
Place of Origin: | China |
Brand Name: | TP |
Certification: | CE |
MOQ: | 1 |
Price: | USD |
Packaging Details: | Aluminium Alloy Case |
Delivery Time: | 3--7 working days after the payment confirmed |
Payment Terms: | TT Money Transfer/the Western Union/Paypal |
Supply Ability: | 200 Unit/Unitds per Month |
Company Info. |
Top Beauty Technology Co.,Ltd |
View Contact Details |
Product List |
professional power Crystal peel microdermabrasion Beauty machine
1.INTRODUCTION
The MD001 Crystal Peeling Machine is based on the principles of
exfoliation. Different from many other chemical exfoliations
available today, it is a dry exfoliation method that is safe to use
on many parts of the body including the face area.
Exfoliating can also be understood as the removal of dead skin
cells. By using the special crystals we provide, it can help
smoothing out wrinkles and fine lines. It is also very beneficial
for scars left from wounds or chicken pox. It also helps to unclog
pores, stimulate the circulation of the skin, eliminate dead skin
cells from the top layer of the skin and improves the skin’s
ability to retain moisture. Giving the skin a more youthful and
healthy appearance.
However, due to the nature of its treatment, it is very important
that this machine is operated by qualified personnel ONLY. Any
violations of the above will void the warranty and the operators
should be responsible for any damages to the systems and/or client.
2. Diamond peeling
The Diamond Peel treatment epidermal layers at varying depths in a
controlled manner, minimizing skin trauma. It mechanically alters
the epidermis and invigorates cell renewal to create a healthy,
balances skin surface. It is then possible to improve or eliminate
many skin conditions and skin imperfections. The machine also has
the hot & cold treatment functions. The cold treatment
functions. The cold treatment function is specially designed for
claming down the skin after peeling. The skin is sensitive after
peeling treatment, so the cold treatment procures is necessary. The
hot treatment function is designed for accelerating the absorption
of nutrition.
3. GENERAL INFORMATION
You have purchased the NV-300 Crystal Peeling micro-dermabrasion
system, which consists of the following:
·1 Microdermabrador; consisting of a vacuum pump, vacuum monitoring
gauge, controls and fittings.
·1 support tower rod
·1 crystal application hand piece with connective tubing
·5 disposable end caps/normal
·3 disposable end caps/nose area
·2 replacement filters
·1 filter funnel
There are NO serviceable parts inside the Microdermabrador
enclosure. This enclosure may only be opened by authorized service
personnel.
4. ASSEMBLY
· Remove the machine from its carton and place it on a flat area
free of any liquid.
· Place the hand piece tower rod in the vice on the back left side
of the machine and tighten.
· Connect the 2 hoses from the hand piece to the back of the
machine where you will see two fittings.
· Fit the tubes into the appropriate fittings. Push both until they
stop. (If they are not fitted securely, the machine will not work
correctly). Tug the tubing. It should feel tight.
· Plug the machine into a correct electrical outlet.
· Turn on the power switch. Make sure that the switch lights up and
that you have power.
· Remove the hand piece from the holder and check for vacuum
pressure by liking. Be careful not to leave the hand piece over any
over any one area for more than a couple of seconds.
· You should feel sufficient vacuum pressure and check for wastes
entering into the waste bottle.
YOUR CRYSTAL PEELING MACHINE IS NOW READY TO OPERATE
5. PREPARATION
1.Prepare cold towels or other likes. The towel should be damp not
wet.
2.Sterilize hands and put on disposable latex gloves and
mouthpiece.
3.Remove all jewelry on the client.
4.Prepare the skin surface for treatment by first cleansing the
area using the prescribed cleanser. You must also cool the skin
down by using chilled towels. This will remove any residual
cleansing product left on the skin.
5.Make sure the skin is dry to the touch.
6.Take your hand-piece, making sure it, especially the cap, is
either properly sterilized or replaced.
7.Begin treatment.
8.Once completed the treatment, you must cool the treated surface
of the skin by applying cold towels. Keep doing this until the skin
becomes cool to the touch.
9.The sin has just experienced an abrasive treatment. It is normal
that there may be some redness as well as a warm effect.
10.Make sure the clients do not use any other abrasive product on
the skin, as it may cause an adverse reaction.
Prior to beginning the Crystal Peel treatment, make sure that the
skin is dry to the touch. Depending on the service and skin
condition, you may choose to use one pass or many slightly longer
timed passes. Movements should be gentle and rhythmical, but not
irritating or uncomfortable. Treatments can be done slowly and in
detail-up to 30 minutes FOR THE ENTIRE BODY. A slight reddening
after the treatment is a normal reaction.
When working on the face, be sure to follow the pattern of the flow
chart (se face flow chart). If working on the body, be sure to use
both horizontal and vertical strokes in a “fiber” type action. The
strokes may be rapid and repeated over the same area to ensure
coverage before moving on to the nest skin area.