Country/Region china
Company Shenzhen Honiton (HONTON) limited
Categories 2 In 1 Soldering Station
Update 2017-10-23 11:12:29
ICP License Issued by the Chinese Ministry
Product Features
1. Unique design of three heating areas operating independently to control temperature more accurately.
2, First / second temperature areas heat independently, which can set up 8 rising temperature segments and 8 constant temperature segments to control. It can save 10 groups of temperature curvesat the same time.
3. The third area uses far-infrared heater to preheat and control the temperature independently, so that the PCB can be fully preheated during the desoldering process and it can be free from deformation.
4. Choose imported high-precision K-Sensor and closed-loop to detect the up/down temperature precisely.
5. After finishing desoldering & soldering, there is an alarming. When the temperature goes beyond control, the electric circuit can cut off automatically , with over-heating protection.
6. Use a powerful cross-flow fan to cool the PCB rapidly to prevent it from deformation and ensure the welding effct.
7. Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled.
8. This machine can be connected to a computer to be controlled more conveniently with a built-in PC serial port and a proprietary software attached to it.
9. For large thermal capacity of PCB/CSP/QFP or other high-temperature and lead-free welding requirements, all can be handled easily
Machine parameters
01 |
Total Power |
4600W |
|
02 |
Main Heater |
800W |
|
03 |
Sub Heater |
The second zone |
800W |
The third zone(left, middle, right) |
Total:3000W(can be controlled independently) |
||
04 |
Power supply |
AC220V 50/60Hz |
|
05 |
Machine dimension |
L640*W630*H550mm |
|
06 |
|||
BGA Rework Station HT-650B BGA Rework Station Images |